A clean neutral (chroma 2.3) that keeps True Black crisp and gray.
See it at Benjamin MooreVision board · Dark and moody
True Black in a dark and moody room
True Black, a DuraSeal stain, is very dark on red oak, with almost no undertone (measured from its own picture: LRV 3). Here it’s shown with Coventry Gray walls, Chantilly Lace trim, and Sea Salt on the cabinets, chosen by the numbers.
AI assisted The rooms are AI generated, simulated photos. The floor, the paint colors and every number are real.
CutPile Photoreal Rendering
CutPile Photoreal Rendering
CutPile Photoreal Rendering
The floor, measured
Read from its own picture, not from a name.
- LRV
- 3
- Lightness L*
- 21
- Undertone
- Gray
- Hue
- 307°
A near gray, with almost no warmth. LRV is light reflectance value, the share of light a surface sends back, the same scale paint makers print on every chip: 0 is black, 100 is white.
True Black is calm and even from board to board (a spread of 1.5 in L*), so it reads as one quiet plane.
The shaded band is within 30 points of the floor. A wall inside it blurs into the floor; BS 8300 asks for at least 30 points between surfaces that meet.
Walls, trim and cabinets
Named colors with the maker's code and LRV, each linked to its page.
A soft, cool leaning color (hue 111°) that keeps True Black crisp and gray.
See it at Sherwin-Williams87 points over True Black in LRV, a clean white (chroma 2.7) that keeps True Black crisp.
See it at Benjamin MooreA light color with some life in it, so cabinets float off True Black (a 60 point step in LRV).
See it at Sherwin-WilliamsCabinets in Sea Salt or Chantilly Lace: a dark floor needs light cabinets to float above it.
| Role | Color | Maker and code | LRV | From the floor |
|---|---|---|---|---|
| Floor | True Black | DuraSeal stain on red oak | 3 | |
| Walls | Coventry Gray | Benjamin Moore HC-169 | 48.2 | +45 |
| Or walls | Clary Sage | Sherwin-Williams SW 6178 | 41 | +38 |
| Trim and ceilings | Chantilly Lace | Benjamin Moore OC-65 | 90 | +87 |
| Cabinets | Sea Salt | Sherwin-Williams SW 6204 | 63.2 | +60 |
Wood, rugs and metals
Contrast, not a match.
Wood furniture
Rugs and fabric
Metals
Room by room
The palette put to work around True Black.
- Living roomCoventry Gray walls and Chantilly Lace trim over the True Black floor, velvet in pewter with a smoke pillow, aged brass lamps on low.
- KitchenCabinets in Sea Salt so they float off the True Black floor, Chantilly Lace walls and trim, polished nickel pulls.
- BedroomClary Sage walls, pewter bedding, nightstands in a mid brown wood, chrome on the lamps.
- EntryA stone gray runner on the True Black floor, Sea Salt on the door, a polished nickel mirror.
What to avoid
The near misses, by the numbers.
- Walls at the lightness of True Black: Caviar (Sherwin-Williams SW 6990, LRV 3) sits within a point of its LRV of 3, so wall and floor would blur into one.
- Whites that lean yellow: beside True Black, a near gray, they look dingy.
Questions
About True Black and color, answered from the numbers above.
What wall color goes with True Black flooring?
Coventry Gray (Benjamin Moore HC-169, LRV 48.2): a clean neutral (chroma 2.3) that keeps True Black crisp and gray. It sits 45 LRV points from the floor (LRV 3), more than the 30 points that keep a wall and a floor reading apart. Or Clary Sage (Sherwin-Williams SW 6178, LRV 41).
What trim and ceiling color goes with True Black?
Chantilly Lace (Benjamin Moore OC-65, LRV 90): 87 points over True Black in LRV, a clean white (chroma 2.7) that keeps True Black crisp.
What cabinet color goes with True Black?
Sea Salt (Sherwin-Williams SW 6204, LRV 63.2): a light color with some life in it, so cabinets float off True Black (a 60 point step in LRV). Cabinets in Sea Salt or Chantilly Lace: a dark floor needs light cabinets to float above it.
What wood furniture goes with True Black?
Contrast, not a match: a step lighter: a mid brown wood (like our Special Walnut stain sample).
How do I put a room together around True Black?
Living room: Coventry Gray walls and Chantilly Lace trim over the True Black floor, velvet in pewter with a smoke pillow, aged brass lamps on low. Kitchen: Cabinets in Sea Salt so they float off the True Black floor, Chantilly Lace walls and trim, polished nickel pulls.
Is True Black a light or a dark floor?
Very dark: LRV 3 and L* 21, measured from its own picture, with almost no undertone. At LRV 3, True Black is very dark: it is at its best in a big room with good light and warm lamps, and it shows dust, pet hair and fine scratches more than a mid tone.
What colors should I avoid with True Black?
Walls at the lightness of True Black: Caviar (Sherwin-Williams SW 6990, LRV 3) sits within a point of its LRV of 3, so wall and floor would blur into one. Whites that lean yellow: beside True Black, a near gray, they look dingy.
The room it suits
Light, size and wear, from the floor's own record.
At LRV 3, True Black is very dark: it is at its best in a big room with good light and warm lamps, and it shows dust, pet hair and fine scratches more than a mid tone.
At 2.25 inches a board, True Black lays about 64 boards across a 12 foot room, the busy, tailored look of a classic strip floor.
A sand and finish of red oak strip floors in any room above grade.
- HardnessNorthern red oak: Janka 1,290 lbfThe force to press a steel ball halfway into the wood; a higher number dents less under heels and chair legs. How hard is that? The Janka scale
- FinishStain on site, then clear coatsThe color is in the wood, so a worn floor can be sanded and stained again.
From the floor's own record
What only this floor's data can say.
The same look in waterproof vinyl or laminate: Black, Stanton Nero Marquina, only 3.3 apart in color (CIEDE2000).
The nearest of our other stains is Royal Mahogany (8.8 apart, CIEDE2000, from our own photographs on red oak).
The floor
A stain we put on your own oak floor.
DuraSeal
True Black
Stain on red oak
Stain · on red oak · 2-1/4 in strip
Take it with you
Scan to open this board on your phone.
Powell Flooring, 1811 Union Valley Rd, West Milford, NJ 07480
Monday to Friday, 10am to 4pm · Open later by request
How we chose
Paint names, codes, hex and LRV as Sherwin-Williams and Benjamin Moore publish them (each color links to its page).
BS 8300-2:2018 asks for a difference of at least 30 LRV points between adjacent surfaces, such as a floor and a wall, so the surfaces read apart.
The floor measured from its own picture in CIELAB (D65); the wood tones from our own photographs of 37 stains on oak.
Janka hardness from the USDA Forest Products Laboratory Wood Handbook (2021), Table 5-3b, at 12 percent moisture.
A picture's lightness depends a little on how it was lit, so the floor's LRV is read from the evenly lit field the visualizer lays and rounded. See the real floor before you choose paint: visit the showroom, or ask for a free measure and estimate.


