A clean neutral (chroma 3.1) that keeps Chesapeake Oak crisp and gray.
See it at Sherwin-WilliamsVision board · Coastal
Chesapeake Oak in a coastal room
Chesapeake Oak from the COREtec Pro Classics line is a light vinyl plank with almost no undertone (measured from its own picture: LRV 44). Here it is with High Reflective White walls, Extra White trim, and Hale Navy as the deep note, chosen by the numbers.
AI assisted The rooms are AI generated, simulated photos. The floor, the paint colors and every number are real.
CutPile Photoreal Rendering
CutPile Photoreal Rendering
CutPile Photoreal Rendering
The floor, measured
Read from its own picture, not from a name.
- LRV
- 44
- Lightness L*
- 72
- Undertone
- Gray
- Hue
- 64°
A near gray, with almost no warmth. LRV is light reflectance value, the share of light a surface sends back, the same scale paint makers print on every chip: 0 is black, 100 is white.
Chesapeake Oak has a gentle movement from board to board (a spread of 2.4 in L*): calm, but not flat.
The shaded band is within 30 points of the floor. A wall inside it blurs into the floor; BS 8300 asks for at least 30 points between surfaces that meet.
Walls, trim and cabinets
Named colors with the maker's code and LRV, each linked to its page.
A clean neutral (chroma 2.7) that keeps Chesapeake Oak crisp and gray.
See it at Benjamin Moore42 points over Chesapeake Oak in LRV, a clean white (chroma 2.6) that keeps Chesapeake Oak crisp.
See it at Sherwin-WilliamsDeep and quiet, 36 points darker than Chesapeake Oak in LRV, a frame for a gray floor.
See it at Benjamin MooreLower cabinets or an island in Hale Navy, uppers and trim in Extra White. The floor at LRV 44 sits between the two (8 and 86).
| Role | Color | Maker and code | LRV | From the floor |
|---|---|---|---|---|
| Floor | Chesapeake Oak | COREtec Pro Classics | 44 | |
| Walls | High Reflective White | Sherwin-Williams SW 7757 | 92.7 | +49 |
| Or walls | Chantilly Lace | Benjamin Moore OC-65 | 90 | +46 |
| Trim and ceilings | Extra White | Sherwin-Williams SW 7006 | 85.9 | +42 |
| The deep note | Hale Navy | Benjamin Moore HC-154 | 8.4 | -36 |
Wood, rugs and metals
Contrast, not a match.
Wood furniture
Rugs and fabric
Metals
What to avoid
The near misses, by the numbers.
- Walls at the lightness of Chesapeake Oak: Saybrook Sage (Benjamin Moore HC-114, LRV 45.5) sits within a point of its LRV of 44, so wall and floor would blur into one.
- Creamy or yellow whites: beside Chesapeake Oak, a near gray, they look dingy.
Questions
About Chesapeake Oak and color, answered from the numbers above.
What wall color goes with Chesapeake Oak flooring?
High Reflective White (Sherwin-Williams SW 7757, LRV 92.7): a clean neutral (chroma 3.1) that keeps Chesapeake Oak crisp and gray. It sits 49 LRV points from the floor (LRV 44), more than the 30 points that keep a wall and a floor reading apart. Or Chantilly Lace (Benjamin Moore OC-65, LRV 90).
What trim and ceiling color goes with Chesapeake Oak?
Extra White (Sherwin-Williams SW 7006, LRV 85.9): 42 points over Chesapeake Oak in LRV, a clean white (chroma 2.6) that keeps Chesapeake Oak crisp.
What accent color goes with Chesapeake Oak?
Hale Navy (Benjamin Moore HC-154, LRV 8.4): deep and quiet, 36 points darker than Chesapeake Oak in LRV, a frame for a gray floor. Lower cabinets or an island in Hale Navy, uppers and trim in Extra White. The floor at LRV 44 sits between the two (8 and 86).
What wood furniture goes with Chesapeake Oak?
Contrast, not a match: a step darker: a honey tone (like our Fruitwood stain sample), or a step lighter: black or painted pieces.
Is Chesapeake Oak a light or a dark floor?
Light: LRV 44 and L* 72, measured from its own picture, with almost no undertone. At LRV 44, Chesapeake Oak is light: it bounces light back into the room, suits north facing rooms, basements and small rooms, and shows dark grit more than lint.
What colors should I avoid with Chesapeake Oak?
Walls at the lightness of Chesapeake Oak: Saybrook Sage (Benjamin Moore HC-114, LRV 45.5) sits within a point of its LRV of 44, so wall and floor would blur into one. Creamy or yellow whites: beside Chesapeake Oak, a near gray, they look dingy.
The room it suits
Light, size and wear, from the floor's own record.
At LRV 44, Chesapeake Oak is light: it bounces light back into the room, suits north facing rooms, basements and small rooms, and shows dark grit more than lint.
At 7 inches a board, Chesapeake Oak lays about 21 boards across a 12 foot room, so the room reads open with few seams.
Chesapeake Oak is waterproof, so it belongs in kitchens, baths, mudrooms and basements as well as living spaces.
- Wear layer20 milAbout 0.51 mm of clear protection over the printed wood, the part that takes the traffic.
- CoreSPC, a rigid stone polymer coreFirm underfoot and resists dents from furniture.
- FinishUV Acrylic
- WaterWaterproof (the maker's word)Wet mopping is fine; a flood is not.
From the floor's own record
What only this floor's data can say.
One of our most-asked-for floors: estimated 6 times, chosen 2 times since 2021.
Chesapeake Oak is lighter than 86 percent of the 1,197 vinyl floors we carry, measured the same way, and warmer than 7 percent of them.
The same look in real wood: Aged Pearl, Mullican Williamsburg Plank 4" Hickory, only 2.0 apart in color (CIEDE2000).
To get this color on an oak floor you already have, the nearest of our stains is Country White (8.2 apart, CIEDE2000, from our own photographs on red oak).
| Width | 7 in |
|---|---|
| Thickness | 0.196" |
| Wear layer | 20 mil |
| Finish | UV Acrylic |
| Edge | Micro bevel |
| Installation | Floating or direct glue |
| Core | SPC |
| Construction | COREtec Residential SPC |
| Carton | 28.84 sq ft |
| Water | Waterproof (the maker's word) |
The floor
Every color, price and detail on its own page.
Chesapeake Oak
COREtec Pro Classics · VV017-01001
Waterproof vinyl plank · SPC · 7 in
$4.09 per sq ft · $117.96 a carton
Material only. Delivery and installation extra.
Take it with you
Scan to open this board on your phone.
Powell Flooring, 1811 Union Valley Rd, West Milford, NJ 07480
Monday to Friday, 10am to 4pm · Open later by request
How we chose
Paint names, codes, hex and LRV as Sherwin-Williams and Benjamin Moore publish them (each color links to its page).
BS 8300-2:2018 asks for a difference of at least 30 LRV points between adjacent surfaces, such as a floor and a wall, so the surfaces read apart.
The floor measured from its own picture in CIELAB (D65); the wood tones from our own photographs of 37 stains on oak.
A picture's lightness depends a little on how it was lit, so the floor's LRV is read from the evenly lit field the visualizer lays and rounded. See the real floor before you choose paint: visit the showroom, or ask for a free measure and estimate.
More vision boards
AI generated, simulated photo
Mornington Oak in a warm modern room
COREtec Originals Enhanced
AI generated, simulated photo
Special Walnut in a traditional room
DuraSeal stain on red oak
AI generated, simulated photo
Sandy Oak in a modern farmhouse room
Legacy Flooring Collection Toucan 7 in