# True Black in a dark and moody room

True Black, a DuraSeal stain, is very dark on red oak, with almost no undertone (measured from its own picture: LRV 3). Here it’s shown with Coventry Gray walls, Chantilly Lace trim, and Sea Salt on the cabinets, chosen by the numbers.

A vision board by Powell Flooring, 1811 Union Valley Rd, West Milford, NJ 07480, 973-728-9717. AI assisted: the rooms are AI generated, simulated photos; the floor, the paint colors and every number are real.
Page: https://www.powellflooring.com/vision-boards/true-black-dark-moody

## The floor
- True Black, DuraSeal stain on red oak: Stain · on red oak · 2-1/4 in strip
- Every color and detail: https://www.powellflooring.com/sherwin-williams-minwax-duraseal-stain-colors/true-black

## Measured from its own picture
- LRV (light reflectance value, 0 black to 100 white): 3
- CIELAB (D65): L* 21.4, a* 1.3, b* -1.7, chroma 2.1, hue 307.4 degrees
- Undertone: a near gray, with almost no warmth
- True Black is calm and even from board to board (a spread of 1.5 in L*), so it reads as one quiet plane.

## Paint
- Walls: Coventry Gray (Benjamin Moore HC-169, LRV 48.2, +44.9 from the floor). A clean neutral (chroma 2.3) that keeps True Black crisp and gray. Source: https://www.benjaminmoore.com/en-us/paint-colors/color/hc-169/coventry-gray
- Or walls: Clary Sage (Sherwin-Williams SW 6178, LRV 41, +37.7 from the floor). A soft, cool leaning color (hue 111°) that keeps True Black crisp and gray. Source: https://www.sherwin-williams.com/en-us/color/color-family/green-paint-colors/sw6178-clary-sage/
- Trim and ceilings: Chantilly Lace (Benjamin Moore OC-65, LRV 90). 87 points over True Black in LRV, a clean white (chroma 2.7) that keeps True Black crisp. Source: https://www.benjaminmoore.com/en-us/paint-colors/color/oc-65/chantilly-lace
- Cabinets: Sea Salt (Sherwin-Williams SW 6204, LRV 63.2). A light color with some life in it, so cabinets float off True Black (a 60 point step in LRV). Source: https://www.sherwin-williams.com/en-us/color/color-family/green-paint-colors/sw6204-sea-salt/
- Cabinets in Sea Salt or Chantilly Lace: a dark floor needs light cabinets to float above it.

## Wood, rugs and metals
- Wood a step lighter: a mid brown wood, like our Special Walnut stain sample. About 16 points lighter than True Black in L* (37 against 21).
- Rug or fabric, tone on tone: pewter (#767577). 1 in chroma, half the warmth of True Black (2), and 28 points lighter in L*.
- Rug or fabric, across the wheel: smoke (#757d6d). Hue 127°, straight across the color wheel from the 307° of True Black, softened to balance it.
- Rug or fabric, grounding: stone gray (#a2a1a2). A light note at L* 66, 45 points from the 21 of True Black, so a rug keeps its edge.
- Metal: aged brass. A warm metal that agrees with the warm pieces in the room.
- Metal: polished nickel. A bright nickel with a touch of warmth, for the gray undertone of True Black (chroma 2.1).
- Metal: chrome. The brightest and coolest finish, crisp against True Black at chroma 2.1.

## Room by room
- Living room: Coventry Gray walls and Chantilly Lace trim over the True Black floor, velvet in pewter with a smoke pillow, aged brass lamps on low.
- Kitchen: Cabinets in Sea Salt so they float off the True Black floor, Chantilly Lace walls and trim, polished nickel pulls.
- Bedroom: Clary Sage walls, pewter bedding, nightstands in a mid brown wood, chrome on the lamps.
- Entry: A stone gray runner on the True Black floor, Sea Salt on the door, a polished nickel mirror.

## What to avoid
- Walls at the lightness of True Black: Caviar (Sherwin-Williams SW 6990, LRV 3) sits within a point of its LRV of 3, so wall and floor would blur into one.
- Whites that lean yellow: beside True Black, a near gray, they look dingy.

## The room it suits
- At LRV 3, True Black is very dark: it is at its best in a big room with good light and warm lamps, and it shows dust, pet hair and fine scratches more than a mid tone.
- At 2.25 inches a board, True Black lays about 64 boards across a 12 foot room, the busy, tailored look of a classic strip floor.
- A sand and finish of red oak strip floors in any room above grade.
- Hardness: Northern red oak: Janka 1,290 lbf (the force to press a steel ball halfway into the wood; a higher number dents less under heels and chair legs)
- Finish: Stain on site, then clear coats (the color is in the wood, so a worn floor can be sanded and stained again)

## Sources
- Paint names, codes, hex and LRV as Sherwin-Williams and Benjamin Moore publish them (each color links to its page).
- BS 8300-2:2018 asks for a difference of at least 30 LRV points between adjacent surfaces, such as a floor and a wall, so the surfaces read apart.
- The floor measured from its own picture in CIELAB (D65); the wood tones from our own photographs of 37 stains on oak.
- Janka hardness from the USDA Forest Products Laboratory Wood Handbook (2021), Table 5-3b, at 12 percent moisture.
